◼ Features

● 【Higher operating temperature】
our special insulation material can provide continuous operating temperature 350 deg.C, maximum 400 deg.C. *
● 【Rapid heating up and rapid cooling down】
Its thin construction and light weight enable to perform rapid heating response and ecient operation.
● 【Homogeneous temperature distribution】
Etched and patterned foil elements provide with homogeneous temperature on its surface.
● 【Lager operating area / Flexible in wattage requirement】
Etched foil elements provide better thermal efficiency than wiring elements.
● 【Lead-free】
No solder is used.
* The value of continuous operating temperature 350 deg.C, is based on our internal evaluation.
 

◼ Specification

All products listed are available in different voltages.

Heater surface temperature	400deg.C, (Continuous operation 350deg.C, Maximum 400deg.C)
Voltage	~ AC200V±10%
Watt Densities	Max:1.8W/cm2 at suspended in air, Max:2.0W/cm2 at attached to parts. Flexibility allows in a variety of watt density depending on the application.
Insulation resistance	DC500V 100MΩ or more
Dielectric strength	AC1000V / 1min.(Rated voltage is less than 150V), AC1500V / 1min.(Rated voltage is more than 150V)
Thickness	Less than 1.5mm (Excude terminal thickness)
Heater size limitations	350 ✕ 900 mm

◼ Precautions when using this product

●This product is for industrial use only.
●Ask us if the heater is be used in the way to bond with the material to be heated.
●SAMICON 420 is not allowed to operate under the condition where to expose to the water or high humid area.
●Operable temperature depends on your surrounding conditions such as appliance and/or application.
●If you have any questions, please free to ask your sales distributor or directly.