◼ Features

● 【High operating temperature】
This heater can be used at up to 300°C*
● 【Fast response】
The thickness of the heater is as thin as 1.15 mm thanks to a thin insulator(silicone rubber) and the heat capacity is small, and therefore the heater features a fast temperature rise response to the object to be heated (work).
● 【Many variations】
The heater can be optimally designed according to the shape of the object to be heated such as triangular, round, drilling, punching, cutting process, etc.
● 【High thermal efficiency】
The foil-shaped heating element enables the heater to take up a larger heat generation area in the heater surface area, with minimum heating unevenness and high heat efficiency.
● 【Excellent temperature uniformity】
The heating element pattern embedded in heater offers a high degree of design freedom and allows for the heater to partially apply coarse and dense patterns considering the temperature distribution of the object to be heated.

* This maximum temperature is based on the test data of our company and is not a guaranteed value.
* In order to ensure satisfactory usage at high temperature, our company will undertake special adhesive processing for the object to be heated. For details, please contact our sales representative.
 

◼ Specification

Heater surface temperature	Maximum operating temperature 300℃ (normally 250℃) Usable temperature varies according to the actual operating environment.
Capacity tolerance	W±10％
Insulation resistance	100 MΩ or more with a 500 VDC ohmmeter
Dielectric strength	150V or less: 1000 VAC/min. Exceeding 150V: 1500 VAC/min.
Compressive load value (even)	0.49Mpa (5kg/cm2) (Except for lead connections)
Thickness	1.15mm (Except for terminal)
Lead length	300L
Heater size limitations	350 ✕ 2000 mm
Bending radius	10R or more

Configure of standard types

All products listed are available in different voltages.

Size (Width × Length)	Lead AWG	Lead length	Voltage	Wattage	Product code
W25 ✕ L130 mm	22	300L	100V	65W	SSAM2105
W25 ✕ L255 mm	22	300L	100V	130W	SSAM2110
W25 ✕ L380 mm	22	300L	100V	190W	SSAM2115
W25 ✕ L510 mm	22	300L	100V	250W	SSAM2120
W25 ✕ L630 mm	18	300L	100V	300W	SSAM2125
W50 ✕ L130 mm	22	300L	100V	130W	SSAM2205
W50 ✕ L255 mm	22	300L	100V	250W	SSAM2210
W75 ✕ L130 mm	22	300L	100V	200W	SSAM2305
W75 ✕ L255 mm	18	300L	100V	380W	SSAM2310
W100 ✕ L130 mm	22	300L	100V	250W	SSAM2405
W100 ✕ L255 mm	18	300L	100V	500W	SSAM2410
W130 ✕ L130 mm	18	300L	100V	330W	SSAM2505
W130 ✕ L255 mm	16	300L	100V	660W	SSAM2510
W150 ✕ L130 mm	18	300L	100V	390W	SSAM2605
W150 ✕ L255 mm	16	300L	100V	760W	SSAM2610
W150 ✕ L380 mm	14	300L	100V	1100W	SSAM2615
W150 ✕ L510 mm	12	300L	100V	1500W	SSAM2620

* A dedicated adhesive is also available

* Color of the lead wire: yellow/white

◼ Reference data

Saturation curve

Heater surface temperature when suspended in static air at normal temperature.

* This is a reference value because the heater temperature varies depending on the operating environment.

◼ Precautions when using this product

●This product is for industrial use only.
●The product is intended for indoor use; it does not have a waterproof design. Keep the heater out of water and any solutions.
●Beware it may cause an abnormally high temperature and result in premature wire breakage if the contact with the heated object is poor.
●If using the heater sandwiched by metal blocks, contact our sales representative.
●Do not apply excessive external forces (tension, bending, etc.) to the lead wire joint.
●Do not place flammable material near the heater. It could result in a fire.
●Do not stack heaters on top of each other. It may cause an abnormally high temperature and result in premature wire breakage.
●Depending on the usage, use a voltage or temperature controller and perform temperature control with the surface temperature of the heater.