02-805-5888   info@summitindustech.com

Immersion Tubular Heters

Brand : SAKAGUCHI
Category : Heaters
SKU : Immersion Tubular Heters

Features

You can heat water simply by throwing the heater into the water tank and turning on the power supply to the heater.
Heaters of this type can be used in a wide range of applications due to their ease of use.
Cabtyre cable (2m) is equipped.
The hook can be rotated or removed.
 

Types

| Single-phase B2 type for heating water

Single-phase B2 type for heating water

Configure of standard types

All products listed are available in different voltages.

Product code Voltage Watts A B C Number of turns Sheath diameter Plug Grip Length Grip Diameter
WNH13 100V 300W 300mm φ70 130±20mm 2 φ9 - 88L φ32
WNH23 200V 300W 300mm φ70 130±20mm 2 φ9 - 88L φ32
WNH15 100V 500W 350mm φ75 130±20mm 2 φ9 - 88L φ32
WNH25 200V 500W 350mm φ75 130±20mm 2 φ9 - 88L φ32
WNH110 100V 1KW 440mm φ75 145±20mm 2 φ9 - 88L φ32
WNH210 200V 1KW 440mm φ75 145±20mm 2 φ9 - 88L φ32
WNH115 100V 1.5KW 685mm φ95 215±20mm 2 φ9 - 98L φ40
WNH215 200V 1.5KW 685mm φ95 215±20mm 2 φ9 - 98L φ40
WNH120 100V 2KW 685mm φ95 215±20mm 2 φ9 - 98L φ40
WNH220 200V 2KW 685mm φ95 215±20mm 2 φ9 - 98L φ40
WNH230 200V 3KW 920mm φ150 270±20mm 2 φ12 - 98L φ40
WNH250 200V 5KW 980mm φ160 300±20mm 3 φ12 - 98L φ40

* WNH-type heaters use nickel-plated copper pipes for the sheaths. /SNH-type heaters use stainless steel(316L, SS)for the sheath material.

| Three-phase B3 type for heating water

Configure of standard types

All products listed are available in different voltages.

Three-phase B3 type for heating water
Product code Voltage Watts A B C Number of turns Sheath diameter Plug Grip Length Grip Diameter
WNH310 200V 1000W 450mm φ65 180±20mm 2 φ9 - 95L φ40
WNH320 200V 2000W 650mm φ70 200±20mm 2 φ9 - 95L φ40
WNH330 200V 3000W 750mm φ90 220±20mm 2 φ9 - 95L φ40
WNH350 200V 5000W 950mm φ100 240±20mm 2 φ9 - 95L φ40
WNH3100 200V 10000W 1000mm φ150 290±20mm 2 φ12 - 145L φ47
WNH3150 200V 15000W 1000mm φ150 290±20mm 3 φ12 - 145L φ47

* Nickel-plated copper pipes are used for the sheaths.

| Single-phase B2-C type ONH type for heating oil

Configure of standard types

All products listed are available in different voltages.

Single-phase B2-C type ONH type for heating oil
Product code Voltage Watts A B C E Number of turns Sheath diameter Plug Grip Length Grip Diameter
ONH110 100V 1000W 500mm φ100 90±20mm 36mm 2 φ12 98L φ40
ONH210 200V 1000W 500mm φ100 90±20mm 36mm 2 φ12 - 98L φ40
ONH220 200V 2000W 700mm φ100 130±20mm 72mm 4 φ12 - 98L φ40
ONH230 200V 3000W 800mm φ100 250±20mm 130mm 6 φ12 - 98L φ40

* Stainless steel (304, SS) is used for the sheath material of the single-phase B2-C type ONH heaters for heating oil.

Precautions when using this product

This product is for industrial use only.
Do not immerse the grip part in liquid. Take care that the temperature of the grip part does not exceed 70 ℃.
Be sure to ground the heater when it is in use. Before applying power, make sure that the heater is immersed in the liquid up to the liquid level indication.
Do not use the heater at voltage exceeding the rated voltage.
Scale (e.g., water scale or oxide) will eventually form on the surface of the heating portion. Periodically inspect and clean the heater.
Do not expose the heating portion to the air. There is a risk of fire as well as premature wire breakage.
Slightly dimensional tolerance of sheath are existing.

Share