02-805-5888   info@summitindustech.com

Stainless Steel Plate Flange Heater

Brand : SAKAGUCHI
Category : Heaters
SKU : Stainless Steel Plate Flange Heater

Features

The heater is entirely made of stainless steel including the flange. Excellent corrosion resistance, long life, and optimum for water heating.
Flange is in accordance with JIS. Can be fitted immediately to the flange of the mounting part and easily installed and incorporated.
Equipped with a sensor protection tube, easy to control overheating and liquid temperature, and thus suitable for protecting the heater from wire breakage.
We accept special orders, dimensions, materials, etc.; please contact us.
 

Specification

All products listed are available in different voltages.

Configure of standard types
Product No. Product name Material Quantity Remarks
Sheath heater SUS316L 3 φ12 (Pickling)
Protective tube SUS316L 1 φ12 × 10 (Pickling)
Flange SUS304 1 JIS 5K 50A (Pickling)
Bakelite cap Bakelite 1 For ships
Packing - 1 Non-asbestos sheet
Tightening gland SS 1 G3/4
 
Dielectric strength: 1500 VAC/min.
Insulation resistance: 20 MΩ or more with a 500 VDC insulation tester

* This is a reference value, not a guaranteed value

Configure of standard types

Operating temperature: 100℃
Flange specification: JIS 5K 50A
Product code Voltage Three-phase Wattage Total length of heating TL Pipe sheath O.D./quantity Watt density
OF320 200V 2kW±10% 250mm φ12×3 About 4.6W/cm2
OF330 200V 3kW±10% 300mm φ12×3 About 5.4W/cm2
OF350 200V 5kW±10% 400mm φ12×3 About 6.4W/cm2
OF3100 200V 10kW±10% 650mm φ12×3 About 7.4W/cm2

* Heater/protective tube materials: SUS316L

* Bakelite cap is used from 2 to 5 kW.

* Aluminum cap (eyelet) is used for 10 kW.

 

Precautions when using this product

This product is for industrial use only.
For the power lead wire, use a cabtyre cable or a heat-resistant electric wire, caulk the tip with a crimp terminal, and securely attach it to the plug terminal. Fasten the heater completely with bolt and nut to the phase flange.
Do not use the heat generating part exposed to the air. This will result in overheating due to no water and cause early breakage as well as a fire.
Scale (stain/carbide) adheres to the heating part, so check it periodically and clean it before using.
Please consult us when using for heating liquids other than water.
Horizontal mounting is standard for the heater. Note the exposure of the heater in the case of vertical use.

Share